User`s manual

AirLive WHB-5854A Wireless Outdoor Bridge
49
GLOSSARY
Auto Reboot Specifies the enable/disable of auto reboot function for auto recovery.
Authentication Type Specifies open-system or shared key.
Authentication / Deauthentication Always 0 for Bridge
Bridge Distance Enter the value (1 – 28 KM) to specify the distance between a pair of bridges.
Cipher Advertised Specifies current state of advertised cipher negotiations, AES and/or
WEP, and None.
CRC Errors Specifies the number of receive CRC errors.
Data Rate Specifies rate of data transmission. Best selection will adapt the rate to the best
available.
Data / Management / Control Packets can either be data, control, or management.
Specifies the number of packets sent and received for each.
Discarded Frames - receive Specifies the number of receive discarded frames.
Discarded Frames - transmit Specifies the number of transmit discarded frames.
DMA Errors – receive Specifies the number of receive DMA errors.
DMA Errors – transmit Specifies the number of transmit DMA errors.
Duplicate Frames Specifies the number of receive duplicate frames.
Encryption Specifies the enabled state of encryption either yes or no.
Errors Specifies the error count for both transmit and receive.
Excessive Retries Specifies the number of transmit excessive retries.
Fragment Length Specifies the fragment length. Enter a value between 256 and 2346.
MSDU Maximum service data unit. Specifies the number of packets sent and
received by Bridge.
Multicast Specifies the number of multicast packets both sent and received.
PHY Errors Specifies the number of receive PHY errors.
Receive Errors Specifies the number of receive errors.
RSSI AUX Output Specifies the activation of RSSI AUX Output for antenna alignment.