User`s guide

SIP
SIP Configuration
1. Under “SIP Server Settings”, you enter the server address, port, domain
name, and expiration time unit, if you choose to send registration request with
an expiration time.
2. Gateway Settings
• Dial Plan: refer to appendix D of this guide
• # use as a quick dial function: If this box is checked, the dialed digits
would be sent out when ‘#’ key is pressed.
• Enable # to be recognized as dial number: allow ‘#’ key to be appeared in
the INVITE request URI
• Enable * to be recognized as dial number: allow ‘*’ key to be appeared in
the INVITE request URI
• For the line on the endpoint, enter the Line Phone Number, Caller-ID
Name, signaling port value, authentication Username and Password,
and select if AEC is to be performed on this line.
16