User`s guide

IPSec Configuration

This page allows configuration of the device’s IPSec (IP Security) settings.

Enable tunnel 1: Enable/disable tunnel 1 IP sec

Remote IP Address range: start and end of remote IP address range.

Remote security gateway: Remote security gateway IP address

Security Mode: IPSec mode (tunneling/transport)

Outbound AH SPI (DEC): Outbound AH security parameter index number.

Outbound AH Authentication Algorithm: in HMAC-MD5 or HMAC-SHA1

Outbound AH Authentication Key (HEX): hex number up to 40 nibbles

Outbound ESP SPI (DEC): Outbound ESP security parameter index number

Outbound ESP Encryption Algorithm: in 3DES-CBC or DES-CBC

Outbound ESP Authentication Algorithm: in HMAC-MD5 or HMAC-SHA1

Outbound ESP Encryption Key (HEX): hex number up to 48 nibbles

Outbound ESP Authentication Key (HEX): hex number up to 40 nibbles

Inbound AH SPI (DEC): Inbound AH security parameter index number

Inbound AH Authentication Algorithm: in HMAC-MD5 or HMAC-SHA1