User`s manual

Chapter 5. Web Interface Configuration
Air Live IAS-2000 User’s Manual V1.0.
89
¾ Rule Item: This is the rule that you have selected.
¾ Rule Name: The rule name can be changed here.
¾ Enable this Rule: After checking this function, the rule will be enabled.
¾ Action: There are two options, Block and Pass. Block is to prevent packets from passing and Pass is to
permit packets passing.
¾ Protocol: There are three protocols to select, TCP, UDP and ICMP, or choose ALL to use all three
protocols.
¾ Source MAC Address: The MAC address of the source IP address. This is for specific MAC address
filter.
¾ Source/Destination Interface: There are four interfaces to choose, WAN, Wireless, Public LAN
(LAN1/LAN2) and Private LAN (LAN3/LAN4).
¾ Source/Destination IP: Enter the source and destination IP addresses.
¾ Source/Destination Subnet Mask: Enter the source and destination subnet masks.
Specific Route Profile: Click the hyperlink of Setting for Specific Route Profile, the Specific Route Profile list
will appear.