User`s manual

Chapter 5. Web Interface Configuration
Air Live IAS-2000 User’s Manual V1.0.
50
“Password”. There is a Dial on demand function under PPPoE. If this function is enabled, you can set a
Maximum Idle Time. When the idle time is reached, the system will automatically disconnect itself.
5.1.4 WAN2 Configuration
There are 4 methods of obtaining IP address for the WAN2 Port: None, Static IP Address, Dynamic IP Address,
and 802.3ad.
y None: The WAN2 Port is not functional.
y Static IP Address: Specify the IP address of WAN2 Port, which is applicable for the network environment that IP
address cannot be obtained automatically. See the following figure.
y Dynamic IP Address: It is applicable for the network environment that the WAN2 Port can obtain IP address
automatically. For example, a DHCP Server is constructed on the network of the WAN2 Port. See the following
figure.