User`s manual

Chapter 4. Network Configuration on PC

Air Live IAS-2000 User’s Manual V1.0.

4-1. Using DHCP: If you want to use DHCP, please choose

“Obtain an IP address automatically” and click OK.

This is also the default setting. Then, reboot the PC to

make sure an IP address is obtained from IAS-2000.

4-2. Using Specific IP Address: If you want to use specific IP address, you have to ask the network administrator

for the information of IAS-2000: IP address, Subnet Mask, Gateway and DNS server address. .

Caution: If your PC has been set up completed, please inform the network administrator before modifying the

following setup.

y Please choose “Use the following IP

address:” and enter the information given from

the network administrator in “IP address:” and

“Subnet mask:” as well as “Default

gateway:” If the DNS Server column is blank,

please choose “Use the following DNS server

addresses:” and then enter a known DNS

address or the DNS address provided by ISP

and then click OK.