User`s manual

Chapter 4. Network Configuration on PC

Air Live IAS-2000 User’s Manual V1.0.

3-1. Using DHCP: If you want to use DHCP, please choose

“Obtain an IP address automatically” under the “IP

Address” label and click OK. This is also the default

setting. Then, reboot the PC to make sure an IP

address is obtained from IAS-2000.

3-2. Using Specific IP Address: If you want to use specific IP address, you have to ask the network administrator

for the information of IAS-2000: IP address, Subnet Mask, Gateway and DNS server address.

Caution: If your PC has been set up completed, please inform the network administrator before modifying the

following setup.

y Please choose “Specify an IP address:” and

enter the information given to you from the

network administrator in “IP Address:” and

“Subnet Mask:” under the “IP Address” label

and then click OK.