Setup guide

8
8
Internet Access Gateway
IAS
-
2000
English
Step 6: Configure LAN1’s Information
IP Address: Enter the LAN1 port IP
A
ddress or use the default.
Subnet Mask: Enter the LAN1 port
Subnet Mask or use the default.
Disable DHCP Server: If the DHCP
server is disabled, the LAN1 clients must
be configured with an IP address
manually.
Enable DHCP Server: When the option is
selected, IAS-2000 will automatically
provide the necessary IP addresses to all
LAN1 clients.
Click Next to continue.
Step 7: Set LAN1 DHCP Server
If the Enable DHCP Server option is
selected, fields marked with red asterisk
must be filled in.
DHCP Scope: These fields define the IP
address range that will be assigned to the
LAN1 clients. (Note: Be sure that IP
address assigned in this range is NOT
used in other setting through
IAS-2000.)
Domain Name: Enter a domain name
provided by your ISP (e.g. yahoo.com.tw).
WINS Server: Enter the IP address of the
WINS Server (Windows Internet
Naming
Service Server). This field is optional.
Preferred DNS Server: The DNS Server
settings are provided by your ISP. Only
the Preferred DNS Server field is
mandatory. Contact your ISP if you are
unsure of the DNS Server settings.
Alternate DNS Server: The DNS Server
settings are provided by your ISP. This
field is optional.
Click Next to continue.