Setup guide

1
1
7
7
Internet Access Gateway
IAS
-
2000
English
During IAS-2000 restart, a “Restarting
now. Please wait for a moment.”
message will appear on the screen.
Please do not interrupt IAS-2000 until
the Configuration Wizard has
disappeared. This indicates that the
restart process has been completed.
Now, the base configuration for
Campus environment has been
finished!
If all the steps are done properly, IAS-2000 can be further connected to
the managed network to experience the controlled network access
environment. Firstly, connect a user-end device to the network at
IAS-2000’s Public LAN and set to obtain an IP address automatically. Afte
r
the network address is obtained at the user end, open an Internet browse
r
and link to any website. Then, the default logon webpage will appear in the
Internet browser.
Key in the username and password (e.g.
test@LDAP for the username and test
for the password) already existed in the
LDAP server then click Submit button.
Attention: Use the LDAP server user account, please key in
“username@postfix” where the username is already existed in your
LDAP server.