Setup guide

1
1
4
4
Internet Access Gateway
IAS
-
2000
English
Step 5: Set WAN1 Port’s Static IP
Address
Enter the IP Address, Subnet Mask and
Default Gateway provided by your ISP.
Click Next to continue.
Step 6: Configure LAN1’s Information
IP Address: Enter the LAN1 port IP
A
ddress or use the default.
Subnet Mask: Enter the LAN1 port
Subnet Mask or use the default.
Disable DHCP Server: If the DHCP
server is disabled, the LAN1 clients must
be configured with an IP address
manually.
Enable DHCP Server: When the option
is selected, IAS-2000 will automatically
provide the necessary IP addresses to all
LAN1 clients.
Click
Next
to continue.
Step 7: Set LAN1 DHCP Server
If the Enable DHCP Server option is
selected, fields marked with red asterisk
must be filled in.
DHCP Scope: These fields define the IP
address range that will be assigned
to the
LAN1 clients. (Note: Be sure that IP
address assigned in this range is NOT
used in other setting through IAS-2000.)
Domain Name: Enter a domain name
provided by your ISP (e.g. yahoo.com.tw).