User guide

AirLink+ 15
16-Port 10/100Mbps Ethernet Switch (Rack Mount) User Guide
The LED indicator panel contains the following indicators:
•
Power (PWR)Power (PWR)
Power (PWR)Power (PWR)
Power (PWR)This indicator lights green when the
switch is receiving power , otherwise, it is off.
•
Link/Activity (green)Link/Activity (green)
Link/Activity (green)Link/Activity (green)
Link/Activity (green)This indicator lights up green
when the port is connected to a Fast Ethernet or
Ethernet station. If this indicator is blinking green, the
Switch is transmitting or receiving data.
•
100 Mbps (green)100 Mbps (green)
100 Mbps (green)100 Mbps (green)
100 Mbps (green)This indicator lights up green when
the port is connected to a 100-Mbps Fast Ethernet
station. Otherwise, the LED is off when the port is
connected to a 10-Mbps Ethernet station.
Twisted-Pair Ports
Twisted-pair ports support automatic MDI/MDIX crossover
detection function gives true “plug and play” capability
without the need of confusing crossover cables or crossover
ports.
With the Auto-MDI function, you just need to plug-in the
network cable to the hub directly and no need to care if the
end node is NIC (Network Interface Card) or switches and
hubs.
LED Indicator Panel
Figure 4 shows the Switch’s LED indicators.
Figure 4. Switch LED Indicators
Power
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
LINK
100 Mbps
ACT