User guide

AirLink+ 11
16-Port 10/100Mbps Ethernet Switch (Rack Mount) User Guide
• Screws and two mounting brackets
• This User Guide
If any item is found missing or damaged, please contact
your local reseller for replacement.
Installation
The site where you install the Switch stack may affect its
performance. Use the following guidelines when installing
the switch:
• Install the Switch in a cool and dry place. See
specifications for the acceptable temperature and
humidity operating ranges.
• Install the Switch in a site free from strong
electromagnetic field generators (such as motors),
vibration, dust, and direct exposure to sunlight.
• Leave at least 10 cm of space at the front and rear of the
hub for ventilation.
• Install the Switch on a sturdy, level surface that can
support its weight, or in an EIA standard-size
equipment rack. For information on rack installation,
see the next section, Rack Mounting.
When installing the Switch on a level surface, attach the
rubber feet to the bottom of each device. The rubber feet
cushion the hub and protect the hub case from scratching.
Rack Mounting
The switch can be mounted in an EIA standard-size, 19-inch
rack, which can be placed in a wiring closet with other
equipment. Attach the mounting brackets at the switch's
front panel (one on each side), and secure them with the