User`s manual

HAPTER

ARDWARE

NSTALLATION

2.1 Connecting Your Modem

Note: For safety, before installing and uninstalling your modem, please make sure the

telephone line is UNPLUGGED from your modem.

Step 1: Power off your computer.

Step 2: Connect one end of the RS-232 serial cable to the modem and the other to your

computer’s serial port.

Note: Connect the male end of the RS-232 cable to the modem’s serial port and the

female end to your computer. Choose suitable 9-pin or 25-pin female connector

according to your computer’s serial port.

Step 3: Plug one end of the RJ-11 phone cord into the LINE jack on the modem, and plug

the other end into your phone jack.

Step 4: For model with PHONE port only. If you want to use a telephone on the modem’s

phone line while the modem is not used , plug the telephone’s cord into the

modem’s PHONE jack.