Installation guide

Step 4 Fasten the hard drive to the enclosure bracket with the provided screws.
Step 5 Replace the front panel into the enclosure.
Step 6 Secure the 2 screws that were removed in steps 1.
Step 7 Connect one end of the power cord to the back of the enclosure and
connect the other end to a power outlet.
Step 8 Connect one end of the USB cable to the enclosure and the other end
to your computer.
Step 9 Turn the power switch to the ON position. The hard drive is ready to use
and you can find it under “My Computer”. Some new hard drive needs to be
formatted before you can see it under My Computer, please continue on
Section 2.
Congratulations! The hard drive installation is complete.