User guide

Rev 3.0B Feb.08 20
OncetheDUNconnectionisinitiated,bydefault,itwilltake
overasthe“defau ltroute”fornetworkcommunicationand
specificallyforInternetaccess.Ifyouwantthetwoconnections
toco‐exist,youwillneedtode‐select“Usedefaultgatewayon
remotenetwork”(describedlater)andusetheroute
command
inWindowstosetuproutingthroughthemodemproperly.
Thisguidedoesnotprovideinformationontheroute
command.Youmayneedtoconsultwithyournetworkadmin
‐
istratortoproperlyconfigurerouting.
1. Create a new network connection.
a. SelectStart>ConnectTo>ShowAllConnectionstoopen
theNetworkConnectionswindow.
Figure 0-25: Windows : Start menu
b. SelectCreateaNewConnectionunderNetworkTasksin
themenuareaontheleft.