User guide

Rev 3.0B Feb.08 12
• Signal‐Lightshowsthestrengthofthesignalandmaybe
nearlysolid(strongsignal)orflashing(weakersignal).A
slowflashindicatesaveryweaksignal.
• Activity‐Lightswillflashasdataistransferredtoand
fromthePinPointmodemontherem o te network.
• Service‐IndicateswhentheconnectionisHSDPAor
UMTS.UnlitindicatesEDGEorGPRS.
• Power‐Indicatesthepoweradapterisconnectedand
thereispowergettingtotheRavenX.
• TheResetbutton(ontheleftsideoftheRavenX)hastwo
functions.Ifitisquicklydepressedandreleased,the
modemwillsimplypowercycletheinternalhardware.If,
however,theresetisdepressedandheldfor several
seconds(count10slowly,andwaitforthepowerlight
to
gooffafterthelightpatternstops),theALEOSconfigu
‐
rationsettingswillreturntothefactorydefaults.
Light Patterns
TheLEDsonthefrontofthemodemwillrespondindifferent
patternstoindicatemodemstates.
• Normal‐EachLED,mentionedabove,litasapplicable.
• Startup‐TheLEDswillcyclefromlefttoright.
• PassThrumode‐NetworkandSignalLEDswillblinkin
tandem.TheActivityLEDwillblinkwhentran smittingor
receivingdata.
• SOS‐TheNetworkChanandServiceErrorServLEDs
willblinkalternatetoeachother.
• ConfigurationReset‐TheLEDswillcyclelefttorightand
thenrighttoleft4times.
RSSI LED Ranges
RSSI/Signal LED Status Ranges of RSSI (dBm)
On Solid Equal to or stronger than -69
Fast Blink -70 to -79
Normal blink -80 to -89
Slow Blink -90 to -99
Extinguished Equal to or weaker than -100
Caution: If you reset the modem configuration using the reset button,
you may to reconfigure your APN.