User guide

Raven X HSDPA
11 20070914
Connecting to a Computer or other
Device
Figure 0-13: Ethernet
TheEthernetportofyourRavenXcanbeconnecteddirectlyto
acomputerorotherEthernetdevicewitheitheracross‐over
cableorastraight‐throughcable.TheEthernetportonthe
RavenXisauto‐sensingandwillauto‐detectthespeedofthe
connectingdevicefor100baseTX
or10baseT.Ifyouare
connectingthemodemtoahuborswitchyoushouldusea
straightthroughcableorusetheuplinkportonthehubor
switchwithacross‐overcable.
Figure 0-14: Serial
Theserialportcanbeconnecteddirectlytomostcomputersor
otherdevicesusingastandardstraightthroughcable.Ifyou
haveaDCEdevice,youwillneedanullmodemornull
modemcable.
Indicator Lights
WhenyourRavenXisconnectedtopowerandanantenna,
thereisaspecificpatterntothelightstoindicateitsoperation
mode.
Figure 0-15: Raven X Indicator lights
• Network‐Indicatesasuccessfulconnectiontothecellular
networkwithanIPaddressgivenandachannelacquired.