User guide

Rev 3.0B Feb.08 10
YourRavenXwillworkwithmostDual‐BandPCScellular
antennaswithaSMAconnectorthatworksinthehighandlow
frequenciesofthecellulartechnologyofyourmodem.Connect
theprimaryantennaorprimaryRFcabledirectlytothe
antennaconnectoronthebackoftheRavenX.
Tip: When using a cable to an antenna placed away from the
modem, minimize the length of your cable. All gain from a more
advantageous antenna placement can be lost with a long cable to the
modem.
Power
YourRavenXcanbeusedwitheitherDC,availableinmost
automobiles,or110AC,standardUSwallpower,withthe
appropriatepoweradapter.DCcablesandACadaptersare
availableasoptionalaccessoriesinadditiontotheone
includedwithyourRa venX.
Note: When using a DC power
source (such as a car battery or
solar cell), Sierra Wireless
recommends placing a fuse (1-2
Amp) on the line close to the
power source to protect your
power source from possible
surges due to shorts or other line
issues.
TheDCpowercablepositiveleadshouldbeconnectedtothe
batteryorpowersourcepositiveterminal.Thepowercable
negativeleadshouldbeconnectedtotheba tteryorpower
sourcenegativeterminal.
Tip: The DC power cable has a white wire lead in addition to the
power positive and negative. This is for a feature not present in the
Raven line modems. In the Raven X, the white wire lead has no
function and can be ignored.