User guide

Raven XT
51 20080605
Figure 7-2: Digital Input Contact Closure
• Whenadoororotherlatchisopenedorclosed.
• Countingpulsesorotherelectronicevents.
• Whenagaugereachesacertainpoint.
• Whenacontainerfillsorempties.
• Whenaswitchorvalveisopenedorclosed.
• Whenthetowbarisraisedorlowered.
• Connectedtoasensor,theleveloffuelinavehicle.
• Whenthetrunkofavehicleisop enedorclosed.
• Whentheignitionisturnedonoroff.
• Lorsquʹunejaugeatteintunecertainevaleur .
Connecting devices to the IO Port
Note: Before you install the
Raven XE in its final location, be
sure to cover all exposed wiring.
YoucanpurchaseanoptionalI/OPowerCablefortheRaven
XEwhichcanbeusedtoattachdevicestothecombinat ionI/O
portandpowerconnector.Theharnesshaspre‐wiredleadsto
allowyoutocustomizeyourownconnections.Thewiresare
pairedandcolor‐coded.