User guide

Configuration Commands

Rev 2.0 Jul.09 96

DS=n

AllowsaPPPconnectiontobeinitiatedonthehostport.

• n=2:InitiatesthePPPconnection.

CannotbeconfiguredinAceManager.

Hang‐UpCommand.

• n=1:Hang‐up

WithanATtelnetconnection,thiscomm andwillterminat ethe

hostdatamodeandreturntheRavenXEtoanATmode.

CannotbeaccessedinAceManager.

Online(Remote):CausestheRavenXEtogofromCommand

Statetodatastate.CannotbeconfiguredinAceManager.

OPRG=n

Enables/disablesover‐the‐airfirmwareupgradingoftheRaven

XE.WhenSierraWirelessreleasesanewversionofALEOS,

youcanupgradeyourremotemodemswithOPRGenabled.

• n=0:Disables

• n=1:Enables

S53=[method][d.d.d.d][/ppppp]

DestinationIPaddress,port,andmethod.Theseareusedas

defaultsfortheD(Dial)ATcommand.

• method=P:UDP

• method=T:TCP

• method=N:Telnet

• d.d.d.d=IPaddressordomainname 

• ppppp=theportaddress

Examples:

ATS53=T192.168.100.23/12345

ATS53=foo.earlink.com

TelnettothespecifiedIPatport12345.

ATS53=192.168.100.23/12345

QuerythespecifiedIPatport12345.

ATS53=/12345

Queryport12345.

CommandResponseMode.