Installation and User’s Guide AirLiner™ WS100 Wireless Slate
Product Registration If you register your SMART product, we’ll notify you of new features and software upgrades. Register online at www.smarttech.com/registration. Keep the following information available, in case you need to contact Technical Support: Serial Number_____________________________________________ Date of Purchase__________________________________________ FCC Warning This device complies with Part 15 of the FCC Rules.
Important Information Read this installation guide carefully before setting up and using your AirLiner™ WS100 wireless slate. WARNING Keep batteries out of the reach of children. WARNING WARNING WARNING WARNING Do not puncture, crush, heat or disassemble the battery, expose it to fire or liquid, short its terminals, or abuse the battery in any other way. Doing so can cause the battery to explode or ignite, and can cause a fire or personal injury.
WARNING WARNING WARNING When you dispose of the lithium ion battery, cover the terminals with adhesive tape to prevent contact with metal objects. As an additional precaution, do not transport the battery with metal objects. If the battery comes in contact with a metal object, the battery can short and can cause a fire or personal injury.
CAUTION When you are not using the AirLiner slate and its tools, store them in a clean, dry place. CAUTION If the AirLiner slate battery charge is nearly empty and you do not connect the slate to a power outlet, you risk draining the battery completely. The AirLiner slate continues to draw a small amount of battery charge, even when it is turned off.
iv Important Information 99-00666-20 B0
Table of Contents Important Information i About the AirLiner™ WS100 Wireless Slate 1 Features .......................................................................................................................................... 1 Installing the Slate 5 Enabling the Wireless Connection .................................................................................................. 5 Installing the Battery............................................................................................
Customer Support 69 Online Support .............................................................................................................................. 69 Training ......................................................................................................................................... 69 Contacting SMART Technical Support .......................................................................................... 69 General Inquiries.................................................
About the AirLiner™ WS100 Wireless Slate With the AirLiner™ WS100 wireless slate you can interact wirelessly with your computer, SMART Board™ interactive whiteboard or Sympodium™ interactive pen display from up to 52’ (16 m) away. The battery-free tethered pen allows you to control software programs, write notes, and highlight information in digital ink. Multiple slate users can write at the same time as someone at a SMART Board interactive whiteboard.
\\ Locking Slider Overlay DC IN Receptacle for Power Adapter Side View • A paper underlay, installed between the overlay and the workspace, allows you to select customizable tools and start programs when working with your slate (see page 30). Battery Connect Button Battery Compartment Anti-Slip Foot Back View 2 • The Connect button switches the slate to discoverable mode, enabling a wireless connection to your computer (see page 21).
Bluetooth® USB Adapter The Bluetooth USB adapter enables wireless communication between the AirLiner slate and your computer (see page 6). NOTE: If you already have a Bluetooth USB adapter, or your computer has built-in Bluetooth wireless support, you don’t have to install the Bluetooth USB adapter included with the AirLiner slate. Rechargeable Battery The rechargeable lithium ion battery acts as the wireless power source for the AirLiner slate (see page 6).
Cordless Mouse The cordless mouse includes customizable left, right and wheel buttons (see page 33).
Installing the Slate To install the AirLiner WS100 wireless slate, you must: • Enable the wireless connection (page 6). • Install the battery (page 6). • Recharge the battery (page 8). • Install the underlay (page 13). • Install the anti-slip feet (page 15). • Install SMART Board software on the connected computer (page 18). Enabling the Wireless Connection The AirLiner slate connects to your computer using Bluetooth wireless technology, which is radiofrequency technology.
To enable the wireless connection If you want to install the included Bluetooth USB adapter, or if you want to purchase and install a commercially available USB-to-Bluetooth wireless adapter, install the adapter’s driver software according to the instructions that came with the adapter. IMPORTANT • Remove previous versions of Bluetooth software before you install the software included with your Bluetooth USB adapter.
3. Insert the battery connector into its receptacle. The black wire must be closest to the slate’s left edge. Battery Receptacle Left Edge Battery Battery Battery Connector WARNING Do not install the battery backwards or reverse its polarity. Doing so can damage the slate and can cause a fire or personal injury. 4. Push the battery into the battery compartment.
5. Close the battery compartment door. Battery Recharging the Battery A rechargeable lithium ion battery acts as the wireless power source for the AirLiner slate. A power adapter is included with the slate for recharging the battery and for powering the slate from a power outlet. Before you use the slate for the first time, connect the power adapter, and then recharge the battery. You can continue installing and using the slate when the battery is recharging.
To recharge the battery The AirLiner slate power adapter is composed of two parts: the power supply and the power cable. Before you begin, connect the power cable to the power supply. 1. Insert the power adapter’s round connector into the DC IN receptacle located on the right side of the AirLiner slate. DC IN Receptacle 2. Insert the power adapter’s pronged connector into a power outlet.
If the charging indicator doesn’t light up, the AirLiner slate isn’t receiving power. Verify the following: – The battery is correctly installed (see page 6). – The power outlet is working. – The power adapter cables are securely connected. – The AirLiner slate is correctly connected to the power outlet. IMPORTANT If the charging indicator still doesn’t light up after you verify the previous four points, the battery may be completely drained.
3. Click your AirLiner slate in the Select a SMART Product area. A blue border appears around your AirLiner slate. The AirLiner slate Battery Status is located at the bottom right corner of the SMART Board Settings dialog box. A fully green battery indicates a full charge. You can safely use the AirLiner slate wirelessly. (The battery in the previous illustration is 50% charged.) A partially red battery indicates a low charge. You should connect the AirLiner slate to a power outlet.
Tips and cautions on recharging the battery • Turn off the AirLiner slate when you’re not working with it. • Recharge the battery to ensure that some charge remains for when you next use the slate. NOTE: A built-in protection circuit prevents the battery from overcharging. CAUTION • If the AirLiner slate battery charge is low, and you will not use the slate for a few days, fully recharge the battery first.
Installing the Paper Underlay An underlay is a sheet of paper placed between the AirLiner slate’s workspace and its transparent overlay. There is a tool strip of pens and icons printed on the underlay. You can press these pens and icons with the tethered pen to select customizable tools and start programs. One underlay is included with the AirLiner slate. Tool Strip Workspace Underlay TIP You can customize and print new underlays using the SMART Board software control panel (see page 46).
To install the underlay 1. Locate the locking slider on each side of the slate, and then slide them towards the slate’s top edge. Locking Slider Transparent Overlay 2. Grasp the transparent overlay’s upper edges with your fingertips, and then lift the overlay away from the slate. 3. Place the paper underlay on the AirLiner slate. 4. Insert the plastic tabs on the overlay’s lower edge into their corresponding slots on the slate, and then lower the overlay into place. 5.
To install the adhesive anti-slip feet Four black, adhesive anti-slip feet are included with the AirLiner slate. 1. Remove the backing paper from each anti-slip foot. 2. Place each anti-slip foot into one of the circular grooves located on the back of the AirLiner slate, and then push it firmly into the groove to secure it.
Installing the Tethered Pen Use the tether (included) to attach the pen to the AirLiner slate, so that it’s always within reach. To attach the pen to the AirLiner slate 1. Thread one loop of the tether through the opening at the end of the pen, and then slip the rest of the tether through the loop. Pull the tether until the loop is snug.
2. Thread the other loop of the tether through one of the holes located at the back of the slate. 3. Slip the pen and the rest of the tether through the loop. Pull the pen until the loop is snug.
Installing SMART Board Software To maximize your AirLiner slate’s capabilities, install SMART Board software. However, if you don’t install SMART Board software, you can use the slate as a mouse device. To install SMART Board software 1. Turn on your computer and close all programs. 2. Insert the SMART Board software CD (included) in your computer’s CD drive. – Windows operating systems: The installation starts automatically. Follow the on-screen instructions.
Turning on the Slate and Creating a Wireless Connection This chapter explains how to: • Turn on the slate. • Create a wireless connection between the AirLiner slate and your computer (page 19). • Reestablish a wireless connection between the AirLiner slate and your computer (page 22). • Disconnect the AirLiner slate from your computer (page 23). • Turn off the slate (page 24). Turning on the Slate Press the power button to turn on the AirLiner slate.
Creating a Wireless Connection Between the AirLiner Slate and Your Computer The first time you connect the AirLiner slate to a computer, you must create a wireless connection using the software included with your Bluetooth USB adapter or your computer’s built-in Bluetooth wireless support. The procedure to wirelessly connect the AirLiner slate to your computer varies, depending on whether you use a Bluetooth USB adapter or your computer’s built-in Bluetooth wireless support.
To create a wireless connection between the AirLiner slate and your computer IMPORTANT • The first time you create a connection between the AirLiner slate and your computer, it is helpful to position the slate as close to your computer as possible and to ensure that there is a direct, unobstructed line of sight between the slate and your Bluetooth USB adapter or built-in Bluetooth wireless support.
IMPORTANT After you successfully create a wireless connection between the AirLiner slate to your computer, the slate appears as a connected device in your Bluetooth software, and the power indicator on the slate turns solid blue. To confirm a successful connection to your computer, write with the tethered pen on the slate’s workspace. The pointer’s on-screen movement should reflect the pen’s movement on the slate.
To reestablish the wireless connection 1. Reset the device that caused the broken connection: – Turn on the computer. – Insert the Bluetooth USB adapter into your computer’s USB port. – Turn on your computer’s built-in Bluetooth wireless support. – Move the slate within the operational range of the Bluetooth wireless connection. 2. Press the slate’s power button. The slate automatically reestablishes its most recent wireless connection.
To disconnect the AirLiner slate using the computer 1. Open the control panel for your Bluetooth wireless device. 2. Open the list of devices that your computer connects to using Bluetooth wireless technology. NOTE: The procedure required to open the list of wireless connections varies, depending on whether you’re using a Bluetooth USB adapter or your computer’s built-in Bluetooth wireless support, and depending on your operating system.
Using the Slate and its Tools This chapter describes how to use the AirLiner slate’s tools: • the battery-free tethered pen (page 26) • the cordless mouse (page 33) • the function buttons (page 34) • the slate locking feature (page 34).
Using the Battery-Free Tethered Pen Within the slate’s workspace, you can use the tethered pen to point, single-click, double-click, select creative tools, start programs, and more. You can also customize the side switch. Use the tethered pen in place of a mouse device. When you aren’t using the tethered pen, place it in the storage compartment, so that it’s easily accessible for later use.
To point on the display The AirLiner slate’s workspace is a mapped representation of your display, be it your computer screen, SMART Board interactive whiteboard or Sympodium interactive pen display. Each point on the workspace corresponds to a point on your display. When you move the pen on the slate’s workspace, the pointer moves along the corresponding points on your display.
To select or clear the Enable Hover feature NOTE: To select or clear the Enable Hover feature, you must first install SMART Board software (see page 18). 1. Start the SMART Board software control panel: – Windows operating systems: Click the SMART Board icon notification area, and then select Control Panel. – Mac operating system software: Press and hold the Control key and click the SMART Board Tools icon – in your computer’s in the Dock, and then select Open Control Panel.
To click with the tethered pen To replicate a single-click on a mouse, tap the pen tip once on the workspace. To double-click with the tethered pen To replicate a double-click on a mouse, quickly tap the pen tip twice in the same place on the workspace. NOTE: You can increase the Double-Click Zone on the workspace, in order to give yourself more leeway when double-clicking (see page 37). When you select a large Double-Click Zone, you don’t have to tap the pen twice in exactly the same place.
To use the side switch Pressing the side switch as you move the tethered pen on the workspace changes the pen’s function. Upper Side Switch Side Switch (includes upper and lower side switches) Lower Side Switch 1. Press and hold the upper or lower side switch, depending on the tool you want to apply. 2. Position the pointer at the desired location of your display. 3. Press the pen tip on the workspace, and then move it in the desired manner.
To write in digital ink You can select a creative tool on the tool strip (adjacent) or by pressing the tethered pen’s side switch, and then write or draw on the AirLiner slate’s workspace with digital ink. Digital ink mimics the appearance of liquid ink on paper. Creative tools include colored pens, highlighters and stamps.
To use the side switch to erase 1. Press and hold the upper or lower side switch (depending on how you customize the switch) 2. Position the pointer at the desired location of your display. 3. Press the pen tip on the workspace, and then move it along the digital ink you want to erase. To practice hand-eye coordination The following exercise is designed to improve hand-eye coordination, a skill that will help you work with the tethered pen. 1. Open Notebook software or a graphics program. 2.
Using the Cordless Mouse The cordless mouse is battery-free. You can use it like a traditional mouse within the workspace, instead of the tethered pen. Wheel Button Right Mouse Button Left Mouse Button The cordless mouse has three buttons. The left mouse button is set to left-click, the right mouse button is set to right-click, and the wheel button is set to middle-click. In many programs, you can rotate the wheel button to scroll up and down.
Using the Function Buttons There are two customizable function buttons located at the top of the AirLiner slate. By default, the left function button is set to start Floating Tools, and the right function button is set to start Notebook software. However, you can customize the function buttons to suit your needs (see page 44).
To lock and unlock AirLiner slates using the SMART Board icon Windows and Linux operating systems • To lock all AirLiner slates, click the SMART Board icon in your computer’s notification area, and then select Other SMART Tools > Lock Airliners. The AirLiners Locked floating tool appears. • To unlock all AirLiner slates, click the SMART Board icon in your computer’s notification area, and then select Other SMART Tools > Unlock Airliners.
36 Using the Slate and its Tools 99-00666-20 B0
Customizing the Slate This chapter describes how to customize the AirLiner slate and its tools: • Customize the tethered pen (this page). • Customize the function buttons (page 44). • Customize and print underlays (page 46). • Map pointer movement to multiple displays (page 51). NOTE: To customize the AirLiner slate and its tools, you must first install SMART Board software (see page 18).
5. Move the Tip Feel slider to the desired level. Select a firm Tip Feel if you want to apply a lot of pen tip pressure on the workspace, or select a soft Tip Feel if you want to apply minimal pen tip pressure on the workspace. Blue Border Around AirLiner Slate Pen and Button Settings Tip Feel Slider 6. Click OK. The SMART Board Settings dialog box closes. 7. Close the SMART Board software control panel. To customize the side switch 1.
4. Select Pen and Button Settings in the list.
5. Select the desired functions in the upper and lower side switch lists. Side Switch List Item Side Switch Function Print page Print the current page in Notebook software. Next page Go to the next page in Notebook software. Previous page Go to the previous page in Notebook software. Clear screen Clear the current page in Notebook software. Right-click Right-click. NOTE: This is the default setting for the right mouse button. Middle-click Middle-click.
6. If you select Pen or Eraser in the list, click Customize. The Customize Pen dialog box appears. OR The Customize Eraser dialog box appears. a. Select attributes for your pen in the Outline Color, Line Properties and Transparency areas. OR Click an eraser icon to select the desired eraser thickness. b. Click OK. The Customize Pen dialog box closes. OR The Customize Eraser dialog box closes.
7. Click OK. The SMART Board Settings dialog box closes. 8. Close the SMART Board software control panel. To customize Mouse Settings for the tethered pen 1. Start the SMART Board software control panel: – Windows operating systems: Click the SMART Board icon notification area, and then select Control Panel. – Mac operating system software: Press and hold the Control key and click the SMART Board Tools icon – in your computer’s in the Dock, and then select Open Control Panel.
5. Select your mouse settings. Setting Function Double-Click Zone Double-Click Zone allows you to set a greater margin of error when double-clicking. When you select a large Double-Click Zone, you don’t have to tap the tethered pen twice in exactly the same place. Enable Mouse Assist Mouse Assist makes it easier to move the pointer to commonly used buttons and toolbars, such as close buttons and scroll bar buttons .
Customizing the Function Buttons By default, the left function button starts Floating Tools, and the right function button starts Notebook software. However, you can change the functions of these buttons. To customize the function buttons 1. Start the SMART Board software control panel: – Windows operating systems: Click the SMART Board icon notification area, and then select Control Panel.
Left Function Button List Right Function Button List 5. Select the desired functions in the right and left function button lists. List Item Button Function Print page Print the current page in Notebook software. Next page Go to the next page in Notebook software. Previous page Go to the previous page in Notebook software. Clear screen Clear the current page in Notebook software. Right-click Right-click. NOTE: This is the default setting for the right mouse button. Middle-click Middle-click.
6. Click OK. The SMART Board Settings dialog box closes. 7. Close the SMART Board software control panel. Printing and Customizing Underlays An underlay is a sheet of paper between the AirLiner slate’s workspace and its transparent overlay. A tool strip (adjacent) is a toolbar located on the underlay. You can press the icons on the tool strip to select creative tools and start programs. You can customize underlays and their tool strips, and you can also print templay underlays.
4. Select Display Properties in the list. Blue Border Around AirLiner Slate Display Properties 5. Select an underlay template in the Select a color scheme list.
6. Click the Customize and Print button. The Customize and Print Underlays dialog box appears. 7. Click the Print button to print the underlay template. To customize and print an underlay 1. Open the Customize and Print Underlays dialog box by following steps 1 to 6 in the previous procedure. 2. Customize your underlay’s lines and colors by selecting attributes in the Background Properties area. 3. Customize your underlay’s background by selecting attributes in the Image Properties area. You can: a.
4. Click the Configure Icon Strip button to customize your underlay’s tool strip buttons. The Configure Command Strip dialog box appears. 5. Select items in the Available Tools area and click the Add button to move them to your underlay’s tool strip. – Select Notebook software, Calculator, Lock AirLiners and other program buttons from the Launch tab. – Select Print, Undo, Help and other command buttons from the General tab.
8. Click OK to save your underlay changes. Your changes take effect immediately. 9. Click the Print button to print the customized underlay. 10. Click the Close button to exit the Customize and Print Underlays dialog box. NOTE: The SMART Board software control panel saves your most recent underlay. The next time you open the Customize and Print Underlays dialog box, your latest configuration choices appear. To customize creative tool buttons (pens, erasers, highlighters, lines, shapes and stamps) 1.
Mapping to Multiple Displays The AirLiner slate’s workspace is a mapped representation of your display, be it your computer screen, SMART Board interactive whiteboard or Sympodium interactive pen display. Each point on the workspace corresponds to a point on your display. When you move the pen on the slate’s workspace, the pointer moves along the corresponding points on your display.
To map the AirLiner slate to multiple displays 1. Start the SMART Board software control panel: – Windows operating systems: Click the SMART Board icon notification area, and then select Control Panel. – Mac operating system software: Press and hold the Control key and click the SMART Board Tools icon – in your computer’s in the Dock, and then select Open Control Panel. Linux operating systems: Select Applications > SMART Board Software > Control Panel. 2. Click SMART Board Settings.
Maintaining the Slate This chapter describes how to maintain the AirLiner slate: • Clean the slate (this page). • Replace the tethered pen tip (this page). • Replace the battery (page 55). Cleaning the Slate Regularly clean the AirLiner WS100 wireless slate with a soft, damp cloth to remove dust and dirt particles. If necessary, dampen the cloth using mild soap that is diluted with water.
Replacing the Tethered Pen Tip The tethered pen tip (nib) will wear down with regular use. When the tip becomes too short or develops a flat point, you can replace it with another tip. To order a replacement pen tip (Part No. 45-00008-20), contact SMART Technical Support (page 69). CAUTION To maintain the sensitivity of your pen tip, do not store the pen so that it rests on its tip. To replace the tethered pen tip 1. Grasp the tethered pen tip with an O-ring tool or tweezers.
Replacing the Battery Lithium ion batteries typically need to be replaced every two or three years, whether you use them or not. If your battery no longer recharges (see page 8), contact SMART Technical Support (page 69) to order a new one. Only order and install rechargeable lithium ion batteries that have been designed for the AirLiner WS100 wireless slate. WARNING Do not install other battery types in your AirLiner slate. Doing so can damage the slate and can cause a fire or personal injury.
4. Dispose of the battery in accordance with the following recommendations. WARNING Keep batteries out of the reach of children. WARNING WARNING WARNING 56 Do not puncture, crush, heat or disassemble the battery, expose it to fire or liquid, short its terminals, or abuse the battery in any other way. Doing so can cause the battery to explode or ignite, and can cause a fire or personal injury. If the battery leaks, do not allow battery fluid to come in contact with your eyes.
Troubleshooting If your AirLiner WS100 wireless slate isn’t working as expected, try the following: • If an error message appears on your display, follow the instructions suggested in the message. • If you have new hardware or software that’s incompatible with the AirLiner slate, download and install the latest version of SMART Board software at www.smarttech.com/support/software/ index.asp. • Visit www.smarttech.
• Disconnect audio devices connected to your computer that use Bluetooth wireless technology, such as headsets. • Turn off devices operating in the 2.4 GHz band, such as WiFi networks and cell (mobile) phones, or move their antennas further away from your computer. Troubleshooting Scenarios Bluetooth Wireless Connection Bluetooth wireless support isn’t available on your computer To wirelessly connect your slate to your computer, you must first enable a wireless connection (see page 5).
When you try to create a connection between the slate and your computer, the slate doesn’t appear in the list of available devices on your computer When your Bluetooth software searches for available wireless devices, wait for your computer to search for the AirLiner slate, and then select it. The initial connection may take longer than subsequent connections. When you create a wireless connection, the slate must be in discoverable mode, and the power indicator must flash quickly.
The AirLiner slate works when it’s connected to an external power source, but turns off when it isn’t Remove the battery. Check that there is no leakage or other damage to the battery. If the battery is damaged, order a new one (Part No. 01-00173) from SMART Technical Support (page 69). If there’s no indication of damage to the battery, insert the battery into the slate and connect the power adapter to the slate and a power outlet (see page 6). Recharge the battery until the charging indicator turns green.
Tethered Pen When you move the pen tip across the workspace, the pointer doesn’t move on the display Complete the following procedures. After completing each procedure, move the tethered pen across the slate’s workspace to verify if the issue is resolved. • Press the slate’s power button to turn off the slate. Wait 10 seconds, and then press the power button to turn on the slate again. • If the power indicator flashes slowly, the battery’s charge is low and will soon be insufficient to power the slate.
After you customize the tethered pen, it doesn’t work as expected Turn off your computer, and then turn it on again. The wireless connection between your computer and the AirLiner slate is automatically reestablished after you turn on the computer. You can use the tethered pen after the wireless connection is reestablished. The pen’s side switch doesn’t work as expected Complete steps 1 to 8 on page 38, and verify that the upper and lower side switches are set to the functions you want.
Cordless Mouse When you move the cordless mouse across the workspace, the pointer doesn’t move on the display Complete the following procedures. After completing each procedure, move the cordless mouse across the slate’s workspace to verify if the issue is resolved. • Press the slate’s power button to turn off the slate. Wait 10 seconds, and then press the power button to turn on the slate again.
When you move the cordless mouse across the workspace, the pointer’s movement on the display lags or it jumps Optimize the Bluetooth wireless connection, because your Bluetooth wireless connection may not be transmitting data from the slate at the required speed (see page 57). The cordless mouse buttons don’t work as expected 1. Press a mouse button. 2. If the power indicator remains blue when you press the mouse button, press and hold a function button.
Multiple Displays The connected computer is linked to multiple displays, but you’re unable to move the pointer from one display to another. Complete steps 1 to 7 on page 52, selecting Entire Surface from the list in step 5. NOTE: There are different methods for defining the arrangement of multiple displays, depending on your operating system. For further information, refer to the instructions for your operating system.
66 Troubleshooting 99-00666-20 B0
Regulatory Compliance Waste Electrical and Electronic Equipment Regulations Waste Electrical and Electronic Equipment regulations apply to all electrical and electronic equipment sold within the European Union. When you dispose of any electrical or electronic equipment, including SMART products, we strongly encourage you to contact your local WEEE recycling agency for recycling and disposal advice. Your SMART product required the extraction and use of natural resources for its production.
68 Regulatory Compliance 99-00666-20 B0
Customer Support Online Support Visit www.smarttech.com/support to view and download user’s guides, “how-to” and troubleshooting articles, software and more. Training Visit www.smarttech.com/trainingcenter for training materials and information about our training services. Contacting SMART Technical Support SMART Technical Support welcomes your call. However, if you experience difficulty with your SMART product, you may want to contact your local reseller first.
Warranty Product warranty is governed by the terms and conditions of SMART’s “Limited Equipment Warranty” that shipped with the SMART product at the time of purchase. Registration To help us serve you, register online at www.smarttech.com/registration.
Index A AirLiner Slate Locking, 34 AirLiner Wireless Slate Cleaning, 53 Customizing, 37 Features, 1 Installing, 5 Introduction, 1 Maintaining, 53 Turning Off, 24 Turning On, 19 Anti-Slip Feet, 2 Installing, 15 Cordless Mouse Customizing, 33 Using, 33 Writing with Digital Ink, 33 Creating a Wireless Connection, 19 Creative Tool, 31 Customizing AirLiner Wireless Slate, 37 Cordless Mouse, 33 Eraser, 41 Function Buttons, 44 Side Switch, 38 Tethered Pen, 37, 41 Tool Strip, 46 Underlay, 48 B D Band 2.
H O Hand-Eye Coordination, 27, 32 Headsets, 58 HID see Human Interface Device Hover, 27, 43 Human Interface Device, 5 Optimizing the Wireless Connection, 57 Orientation/Alignment Settings, 52 Overlay, 2 P Jumping Pointer, 57, 61, 64 Paper Underlay see Underlay Pen see Tethered Pen Pen and Button Settings, 37, 39 Pen Nib see Tethered Pen Tip Pen Storage Compartment see Tethered Pen Storage Compartment, 1, 26 Pointer Unpredictable Movement (Erratic), 61, 63 Pointing, 27 Power Adapter, 3 Power Button, 19
W Pen, 40 Previous Page, 40 Print Page, 40 Right-Click, 40 Screen Capture Toolbar, 40 Using, 30 Skipping see Jumping (Pointer), 64 Slate see AirLiner Wireless Slate SMART Board Interactive Whiteboard, 1 SMART Board Software Installing, 18 Sympodium Interactive Pen Display, 1 Warranty, 70 Waste Electrical and Electronic Equipment Regulations (WEEE), 67 Wireless Connection Creating, 19 Disconnecting, 23 Enabling, 5 Optimizing, 57 Reconnecting, 22 Reestablishing, 22 Wireless Slate see AirLiner Wireless Slate
74 Index 99-00666-20 B0
SMART Technologies 1207 – 11 Avenue SW, Suite 300 Calgary, AB T3C 0M5 CANADA www.smarttech.com/support www.smarttech.com/contactsupport Support +1.403.228.5940 Toll Free 1.866.518.6791 (Canada/U.S.