Installation guide

2 About the Slate
Side View
If you connect the power adapter cable to the Power Connector port, you can recharge the battery
or use an external power source to power the slate. For information on recharging the battery, see
page 7.
You can insert a printed underlay between the overlay and the workspace. The supplied underlay
includes a tool strip. You can press a tool strip icon with the pen to activate functions or launch
software. The locking sliders hold the overlay in place.
Back View
Press the Connect button to switch the slate into discoverable mode, which allows your computer
to detect the slate when you search for devices. The slate remains in discoverable mode for three
minutes. For information on establishing a connection between the slate and your computer, see
page 13.
The battery compartment houses the rechargeable lithium polymer battery. For information on
recharging the battery, see page 7.
The four anti-slip feet keep the slate stable on flat surfaces.
Locking Sliders
for Overlay
Power
Connector
Port
Overlay
Battery
Connect
Button
Battery
Compartment
One of the Four
Anti-Slip Feet