Installation guide

16 Turning on the Slate and Establishing a Wireless Connection
Terminating the Bluetooth Wireless Connection
If required, you can terminate the Bluetooth wireless connection from either the slate or from the
computer.
Press the Connect button on the back of the slate.
1. Open the control panel for the Bluetooth wireless device.
2. Open the list of the devices that your computer is linking to through the Bluetooth wireless
connection.
NOTE: The appearance of this control panel and the method by which you can open the list of
wireless connections will vary for different Bluetooth wireless adapters and different operating
systems. Some control panels display the connected devices as a list, others display these
devices as a series of icons.
3. Select and delete the connection to the slate.
Turning off the Slate
To turn off the slate, either press the Power button or allow the slate to turn off automatically.
The slate turns off automatically in the following circumstances.
• if you press the Connect button and the slate doesn’t establish a connection with a computer
within three minutes
• if the slate has no wireless connection for more than two seconds
• if the battery’s charge falls below an operational level and the slate isn’t connected to an
external power supply
To terminate the connection from the slate
To terminate the connection from the computer
Battery
Connect
Button