Installation guide

Turning on the Slate and Establishing a Wireless Connection 15
6. When your computer detects the available devices and lists them in the control panel, select
the slate and continue to follow the on-screen instructions.
NOTE: If your computer doesn’t detect the slate, press the slate’s Connect button and repeat
step 4.
7. If you’re asked for an authentication code or passkey, select the “Don’t Use” or “No” option.
The slate doesn’t require passkey authentication.
8. If you’re asked for the device type services to add, select the option for the slate. Otherwise
select mouse.
NOTE: After you successfully connect the slate to your computer it appears as a connected
device in the control panel for your Bluetooth wireless device.
9. To confirm the connection, move the pen across the slate’s workspace. The pointer’s on-
screen movement should reflect the pen’s movement.
NOTE: If you can’t establish the wireless connection within three minutes, the slate turns itself off.
When you’ve established a connection between the slate and your computer, the slate rejects
connection attempts by other computers. However, if you press the Connect button, the wireless
connection is broken and the slate switches back into discoverable mode, enabling a link to a
different computer.
If required, you can also terminate the wireless connection from the computer (page 16).
1. If your slate has turned itself off because the connection was broken for more than two
seconds, undo whatever caused the break. A broken connection can result from:
– shutting down the connected computer
– unplugging a Bluetooth wireless adapter
– turning off a computer’s built-in Bluetooth wireless support
– moving the slate outside the range of the Bluetooth wireless connection
NOTE: To determine the operating distance, see the instructions that came with your
Bluetooth wireless adapter (if you’re using an installed USB-to-Bluetooth wireless adapter) or
the instructions that came with your computer (if you’re using your computer’s built-in
Bluetooth wireless support).
2. Press the slate’s Power button.
The slate automatically reestablishes the most recent wireless connection.
3. To confirm the connection, move the pen across the slate’s workspace. The pointer’s on-
screen movement should reflect the pen’s movement.
To reestablish a Bluetooth wireless connection