Installation guide

Installing the Slate 11
2. Grasp the overlay’s upper edges with your finger tips and lift the overlay away from the slate.
3. Place the underlay on the slate with the tool strip on the right side.
4. Insert the tabs on the overlay’s lower edge into the slots on the slate.
5. Lower the overlay.
6. Slide the locking sliders towards the bottom of the slate. This locks the overlay in place and
protects your underlay.
The tool strip works automatically with SMART Board software. If you like, you can customize the
icon functions (page 28).
Installing the Anti-Slip Feet
You can insert four anti-slip feet to keep the slate stable when you use it on flat surfaces.
Push the anti-slip feet into the appropriate holes on the back of the slate.
To install the anti-slip feet
Battery
Anti-Slip FeetAnti-Slip Feet