Installation guide

Installing the Slate 9
3. If the SMART Board Settings dialog box shows more than one SMART product, press
AirLiner.
The battery’s charge is illustrated in the bottom right corner.
The battery symbol is illustrated as green arrows when the battery is charging.
4. Close the SMART Board Settings and the SMART Board Control Panel dialog boxes.
Follow the advice below to conserve battery charge and ensure that the slate is always ready for
use.
• Turn off the slate when you finish working with it.
• Recharge the battery if you don’t expect to use the slate for a number of days.
NOTE: The slate still draws a small amount of current from the battery, even when the slate is
turned off.
Recharging the battery ensures that the battery still has some charge when you next use it.
There is a built-in protection circuit that prevents the battery from overcharging.
• If you won’t be using your slate for an extended period of time (a month or longer), unplug the
battery from the slate.
• (Windows computers only) When the battery’s charge falls below 20%, an alert in the system
tray reminds you to recharge the battery. When this happens, connect the slate to an external
power source using the power adapter cable. You can continue to use the slate while the
battery is recharging.
Tips and cautions on recharging the battery
CAUTION
If the battery loses all of its charge, you can’t recharge it.
A blue border
surrounds the
selected SMART
product
Battery Status:
Battery Status: