Installation guide

6 Installing the Slate
1. Place the slate upside down on a flat surface.
2. Slide open the battery compartment door.
3. Insert the battery’s plug into the battery socket in the compartment. Install the plug with the
black wire on the left and the red wire on the right.
CAUTION
If you drop the battery onto a hard surface, you should replace the battery even if
there is no obvious damage, as it may be damaged internally. This will prevent
potential damage that could occur to the slate if a damaged battery leaks after
you’ve installed it.
To install the battery
WARNING
Don’t install the battery backwards or reverse the polarity as this can cause
damage to the slate and can cause a fire or personal injury.
Battery
Compartment Door
Battery Compartment
Battery
Battery
Battery Socket