User's Guide

Tip
If Wep encryption is used the Activator automatically determines the key type and length from
what you type. Wep 64 require 5 Ascii characters or 10 hex digits, respectively Wep 128
requires 13 Ascii characters or 26 hex digits.
3.3.4 IP Settings
Check the IP settings. If DHCP is used nothing needs to be done. In case your network requires
Static IP to be used, type in the IP address range to be used, Netmask and Gateway addresses.
Tip
If you only activate a single tag and wish to use static IP setting. Please input Start IP Addrsss
= End IP Address.
Chapter 3. Ekahau Activator T301
13