Operation Manual

AIRIS POWER SERVER

User Manual Rev 1.0

1. New Password: the administrator could change the administrator

password here. Please enter the new password you would like to

change to. Note that you must fill the new password in both

Password change and Password confirmation fields. If both fields are

not the same, the page will not be

submitted.

2. FTP Server: please select the enable radio button to establish the

FTP server. Or select the disable radio button for none.

3. Confirm New Password: please enter the new password again.

4. External Admin.: This feature allows administrators to access the

web based configuration menu from the Internet. The default setting

for this feature is

disabled for security reasons.

5. External Admin. Port: defines a port for the remote

administrator to connect to.

6. Restart device: This function reboots the Powerful Server appliance.

Select the enable radio button to restart SA. The default setting of the

function is disabled.

7. Clear event log: This function is used to clean the system history

that is listed in Event Report (section 8.2). If you choose the “No”

radio button, the event record never clears even when you reboot the

system.

8. Clear DHCP lease: This function is used to clean the DHCP Lease

record listed in section 8.4. Please choose the “Yes” radio button to

clean DHCP lease

report.

9. Restore Factory default: To recover the factory settings, please

choose the “Yes” radio button and

the factory defaults will be loaded.

10. Click the apply button.