Operation Manual

AIRIS POWER SERVER
User Manual Rev 1.0
32
forwarding rules to deal with the packet from the Internet users and direct
theAIRIS Power Serverto forward the specific packets to the specific IP
address. Users from the Internet could be allowed to access the specific
server on your LAN. You can configure different IPs to act as different
virtual servers. For example, the users accessing port 21 will be directed
to “172.16.2.1”. “172.16.2.1” could be a FTP server. Users accessing port
80 will be directed to “172.16.2.2”, an HTTP server on the LAN. For users
outside the LAN, they will feel like many services are running on a single
host. Please follow the steps below.
1. Select Enable radio button in Virtual Server.
2. Enter the IP address , in LAN will be set as a virtual server.
3. Select the Protocol.
4. Enter the number in Ports, the users accessing the port will be
directed to the virtual server in step 2.
5. Please repeat the steps above to establish more virtual servers or
enter “0” in each field for none.
6. Click the apply button.
URL Filter Setup
The URL Filter function is used to restrict internal hosts from accessing
specific URL locations. You deny any access to the URL location specified
in the Site1, Site2 …Site10 fields.
Please follow the steps: