Operation Manual

AIRIS POWER SERVER
User Manual Rev 1.0
24
Network Settings
When you select Network Settings in the left menu of the web page, five
configuration options appear: DHCP Server, IP Alias, Multiple NAT, Route
Settings and DDNS. Please refer to the corresponding section for these
configurations.
DHCP Server
In DHCP Server settings, we assign the rage of the virtual IP addresses
for the four LAN ports of SA. All devices connect to the LAN ports ofAIRIS
Power Serverwill be dynamically assigned the IP addresses within the
range. If you wish to mix dynamic and static IP clients on your network:
Under DHCP server settings, theAIRIS Power Serverdefaults to assigning
IPs 172.16.1.2 through 172.16.1.250...So depending on how many fixed
IP devices they have, they can assign their device to an IP of
172.16.1.251 (through 254) as these IPs will not be handed out by the SA.