User Guide

ManualsBrandsAiris ManualsOtherM137

QUICK START

Congratulations on purchasing this AIRIS LRD TV.

This guide will help you to start using its basic functions and identify the parts of

the screen.

Front Part

1. Speakers 7. Automatic image adjustment/exit

2. Raise channel from signal OSD

3. Lower channel 8. ON/signal selector

4. Raise volume 9. STANDBY/Operation indicator:

5. Lower volume on green when the screen is

6. Menu functioning

10. Infrared sensor

Rear Part (connections)

Summary of content (7 pages)

PAGE 1
QUICK START Congratulations on purchasing this AIRIS LRD TV. This guide will help you to start using its basic functions and identify the parts of the screen. Front Part 2 3 4 5 6 7 8 9 10 1. 2. 3. 4. 5. 6. Speakers Raise channel Lower channel Raise volume Lower volume Menu 7. Automatic image adjustment/exit from signal OSD 8. ON/signal selector 9. STANDBY/Operation indicator: on green when the screen is functioning 10.
PAGE 2
Rear Part (connections ) (cont.) 1. S-Video input 2. Euroconnector input 3. Audio input for connections by components 4. Video inputs by components (interlinked YCbCR and Progressive YPbPr) 5. VGA input 6. DVI input 7. Compound video & stereo audio input 8. Compound video & stereo audio input 9. Stereo audio input (3.5 mm minijack) for VGA and DVI video inputs 10.Power cable connection 11 Aerial input Remote Control Device Description 10 2 9 6 12 3 21 20 18 19 13 14 4 11 5 8 17 7 16 15 1.
PAGE 3
Remote Control Device Descriptoin (cont.) To insert a one-digit number use the numerical keys from 0 to 9. To insert a two-digit number (10-99) first press any button from 0-9 to insert the first digit and then the second digit in less than 2 seconds, using the buttons from 0-9. 3. Volume Control Keys (+/-): press the + key to raise the volume and the – key to lower it. 4. Channel keys (+/-): press the + key to go to the next tuned-in channel. Press the – key to go to the previous channel.
PAGE 4
14. Image Button: press this button to select the different image modes from among Personal, Bright, Medium and Standard. 15. AUTO Button: press this button to adjust the image automatically. (continues on next page) (continued from previous page) Remote Control Device Description (cont.) 16. SCREEN Button: this button enables you to selecting the screen format from among those available : Full screen, 4 :3, wide-screen, cinema, intelligent setting and 14:9. Press it to change from one to another. 17.
PAGE 5
Channel-Tuning To start tuning in the TV channels, check that the aerial is properly connected and that you have selected the channel setting menu on the screen. FIGURE 1 The menu has the following options: Colour system: the options available are PAL, AUTO and NTSC. It is advisable to leave it on AUTO. Channel search: by selecting this option you can enter the channel tuning submenu. Sound system: to hear the sound correctly in Spain, set it to PAL/BG.
PAGE 6
The menu has the following options: Search Mode: Tune in or Surf. Select the SURF option if the TV system is NTSC. Select Tune In if the TV system is PAL. Aerial Type: this enables you to choose between cable or Air. Select AIR to tune in the channels available in Spain. Automatic Search: select this option for the screen to start searching for channels throughout all the frequency bands. The channels found will be stored in the order in which they were found (RECOMMENDED OPTION).
PAGE 7
Lastly, press the MENU key to confirm the change. Follow the same steps with any of the channels you wish.