Quick Start Guide

Quick Start Guide – DFGT-03MCXXX
Copyright © 2021 Airios. All rights reserved.
Airios Confidential and Proprietary Revision 15 – Draft Page 5 of 59
1 Introduction
1.1 Purpose
This document describes a quick start guide for setting up the decorative fireplace gas transceiver (DFGT) for a
decorative fireplace. It covers configuring the controller and installation instructions. The DFGT-03MC18 only has
Ramses RF communication and the DFGT-03MCB23 has both Ramses RF and Bluetooth Low-Energy
communication. Where possible, they are referred to as DFGT.
1.2 Terms, Acronyms and Abbreviations
Below are the terms, acronyms, and abbreviations used within this document. Additional project-specific terms can
be found in the project glossary.
Term, Acronym, Abbreviation
Definition
DFGT
Decorative Fireplace Gas Transceiver
DFRC
Decorative Fireplace Remote Control
ESYS
Ignition control for controlling burners
DBI
Direct Burner Ignition
SP
Standing Pilot
BRDG
Device to communicate with Airios RF devices via Modbus (Gateway)
RF PIR Sensor
Radio Frequency Passive Infrared Sensor (motion detector)
For example: VMI-02MP03
RF
Radio Frequency
RC
Remote Control
NTC
Negative Temperature Coefficient
BLE
Bluetooth Low-Energy
App
Application for smartphone, tablet or personal computer
1.3 References
Abbreviation
Reference Element
Description
I2C Service
Tool
Manual DFGT-03MC18 and I2C servicetool.docx
Manual for configuring the DFGT-
03MC18 with the I2C Service Tool PC
application