Quick Start Guide

Quick Start Guide – DFGT-03MCXXX

Airios Confidential and Proprietary Revision 15 – Draft Page 37 of 59

9 Binding of devices

The DFGT supports binding modes to bind:

 Remote control (DFRC)

(1)

 Person presence detector (PIR RF)

(1)

 Gateway (BRDG)

(1)

 Device or remote control with Bluetooth

(2)

The devices have their own way to enable binding mode.

(1)

DFGT-03MC18 or DFGT-03MCB23 configured for Ramses RF

(2)

DFGT-03MCB23

9.1 Entering binding mode

The DFGT enables binding mode by default after power-up. Binding mode is active for 5 minutes. While binding

mode is active, the DFGT works normally. Binding mode can also be entered by pressing and holding the internal

or external button for 5 seconds.

9.2 BLE binding

The DFGT-03MCB23 is acting as a peripheral and can be bonded to at least 32 devices. When more devices are

trying to bind, the least used device is deleted to prevent that new devices cannot be added. The DFGT-03MCB23

can have at least 4 concurrent links.

After every successful BLE pairing, the pairing window is disabled. To allow another pairing, the pairing window

must be reopened.

Additionally, the paired device needs to authorize itself before the application BLE services can be used. The

supported authorization levels are:

 User / RC

 Service engineer

The user / RC authorization key is a 16-byte GUID that can be programmed during OEM production. The service

authorization 16-byte password can be programmed during OEM production.