Quick Start Guide

Quick Start Guide – DFGT-03MCXXX
Copyright © 2021 Airios. All rights reserved.
Airios Confidential and Proprietary Revision 15 – Draft Page 26 of 59
5 Boost fan and light option
As illustrated in Figure 1, the DFGT offers an option to control a boost fan or light. These can be configured on the
outputs, as described in Appendix B.
5.1 Wiring
The boost fan and light can be connected to the Triac outputs on connector X5, the relay on X6 or the relay output
on the ESYS.
When configuring a light or boost fan on a Triac output, it is recommended to configure the output as a modulated
output. See Appendix B. This offers the functionality to select levels and follow the boost/light level mapping table.
In case of a light, also a wave can be applied.
See paragraph 3.1.2.1 and 3.1.2.2.
5.2 Configuration outputs
To configure the outputs, the following settings can be modified.
Tag
Name
Min
Max
Step
Default
Unit
Remarks
42010
Output Triac 1 function
0
10
1
0
-
See Appendix B.
3 – Boost fan modulated
5 – Light modulated
42011
Output Triac 2 function
0
10
1
0
-
See Appendix B.
3 – Boost fan modulated
5 – Light modulated
42012
Output Relay function
0
10
1
0
-
See Appendix B.
2 – Boost fan
4 – Light
42013
Output ESYS function
(1)
0
10
1
0
-
See Appendix B.
2 – Boost fan
4 – Light
(1)
Boost Fan output Esys (triac)