Quick Start Guide

Quick Start Guide – DFGT-03MCXXX

Airios Confidential and Proprietary Revision 15 – Draft Page 17 of 59

3.4 Second burner

Tag

Name

Min

Max

Step

Default

Unit

Remarks

Secondary burner

available

For second burner available set to ‘1’

Enable secondary

burner on when

main burner on

0 – On ignition only main is switched

1 – On ignition main and second are

switch on in sequence

2 – On ignition main and second are

ignited (even if second is not switched

on)

A fireplace can have a second burner next to the main burner.

The second burner can be an extension to the main burner or be placed parallel to create more flames. For this

there are some configuration options:

1. Normally only the main burner is ignited when the user ignites the fireplace using the remote or APP (set

setting tag 23 to 0)

2. Normally the main and afterwards the second burner is ignited when the user ignites the fireplace (set

setting tag 23 to 1). The delay is set with setting tag 6, Start time second gas valve.

3. Normally the main and second burner are ignited simultaneously when the fireplace is ignited. (set setting

tag 23 to 2)