User's Manual

Auto-Connect The Auto-Connect button can be used to force an association to the
previously connected network or to the “best” network currently available
or can be set to the off or disabled state.
Auto-Connect is in the enable/on state. Connection to the previously
connected network or to the “best” network currently available will occur
automatically.
Auto-Connect is in the disabled/off state. Connections will not be
established automatically.
WZC The WZC button toggles the management of the network connection
between WZC and the Client Utility (Windows XP only).
Microsoft Windows Wireless Zero Configuration is currently managing
the network connection.
The Client Utility is currently managing the network connection.
Help The Help button provides context sensitive help for the current page. All
help files can be printed. All help pages can be resized during viewing.
For AGN3xx based adapters an additional
tab will appear between the WZC and
Help tabs.
Page 20 of 45 Installation and User Guide: Wireless LAN Client