User's Manual
Table Of Contents
- Device Types
- Shipping Package Contents
- System Requirements
- Inserting and Removing the Wireless LAN Client Adapter
- Installing the Wireless LAN Client Adapter Driver and Client Utility
- Custom Installation
- Uninstalling the Client Utility and Drivers
- Service Set Identifiers
- Wireless Bands and Channels
- Client Utility Overview
- Accessing the Client Utility
- Navigating the User Interface
- Scanning for Available Networks
- Working with Profiles
- Wireless Security
Auto-Connect The Auto-Connect button can be used to force an association to the
previously connected network or to the “best” network currently available
or can be set to the off or disabled state.
Auto-Connect is in the enable/on state. Connection to the previously
connected network or to the “best” network currently available will occur
automatically.
Auto-Connect is in the disabled/off state. Connections will not be
established automatically.
WZC The WZC button toggles the management of the network connection
between WZC and the Client Utility (Windows XP only).
Microsoft Windows Wireless Zero Configuration is currently managing
the network connection.
The Client Utility is currently managing the network connection.
Help The Help button provides context sensitive help for the current page. All
help files can be printed. All help pages can be resized during viewing.
For AGN3xx based adapters an additional tab will appear between the WZC and
Help tabs.
Installation and User Guide: Wireless LAN Client Page 21 of 46