User's Manual

F5D8230-4 user draft.doc Page 62 of 89
Manually Configuring Network Settings in Windows 98 or Me
1. Right-click on “My Network Neighborhood” and select “Properties” from the drop-down menu.
2. Select “TCP/IP -> settings” for your installed network adapter. You will see the following
window.
[98 Me IP properties.tif]
3. If “Specify and IP address” is selected, your Router will need to be set up for a static IP
connection type. Write the address information in the table below. You will need to enter this
information into the Router.
4. Write the IP address and subnet mask from the “IP Address” tab (3).
5. Click the “Gateway” tab (2). Write the gateway address down in the chart.
6. Click the “DNS Configuration” tab (1). Write the DNS address(es) in the chart.
[win2k settings chart.tif]
(1)
(2)
(3)