User's Manual

F5D8230-4 user draft.doc Page 61 of 89
4. In the “Local Area Connection Properties” window, click “Internet Protocol (TCP/IP)” and click
the “Properties” button. The following screen will appear:
[XP TCPIP.tif]
5. If “Use the following IP address” (2) is selected, your Router will need to be set up for a static
IP connection type. Write the address information the table below. You will need to enter this
information into the Router.
[win2k settings chart.tif]
6. If not already selected, select “Obtain an IP address automatically” (1) and “Obtain DNS
server address automatically” (3). Click “OK”.
Your network settings are now configured for use with the Router.
(1)
(2)
(3)