User's Manual

F5D8230-4 user draft.doc Page 43 of 89
[virtual_servers.tif]
Choosing an Application
Select your application from the drop-down list. Click “Add”. The settings will be transferred to the
next available space in the screen. Click “Apply Changes” to save the setting for that application.
To remove an application, select the number of the row that you want to remove then click
“Clear”.
Manually Entering Settings into the Virtual Server
To manually enter settings, enter the IP address in the space provided for the internal (server)
machine, the port(s) required to pass (use a comma between multiple ports), select the port type
(TCP or UDP), and click “Apply Changes”. You can only pass one port per internal IP address.
Opening ports in your firewall can pose a security risk. You can enable and disable settings very
quickly. It is recommended that you disable the settings when you are not using a specific
application.