User's Manual

F5D8230-4 user draft.doc Page 29 of 89
Setting your Connection Type if You Are a Telstra® BigPond User [Australia Only]
Your user name and password are provided to you by Telstra BigPond. Enter this information
below. Choosing your state from the drop-down menu (6) will automatically fill in your login server
IP address. If your login server address is different than one provided here, you may manually
enter the login server IP address by placing a check in the box next to “User decide login server
manually” (4) and type in the address next to “Login Server” (5). When you have entered all of
your information, click “Apply Changes” (7). After you apply the changes, the Internet Status
indicator will read “connection OK” if your Router is set up properly.
[TELSTRA.tif]
1. Select your State
Select your state from the drop-down menu (6). The “Login Server” box will automatically be filled
in with an IP address. If for some reason this address does not match the address that Telstra
has given, you can manually enter the login server address. See “User decide login server
manually” (4).
2. User Name
Provided by your ISP. Type in your user name here.
(1)
(2)
(3)
(4)
(5)
(6)
(7)