User's Manual

F5D8230-4 user draft.doc Page 22 of 89
Step 4: Configuring your Router for Connection to your Internet Service Provider (ISP)
The “Internet/WAN” tab is where you will set up your Router to connect to your Internet Service
Provider (ISP). The Router is capable of connecting to virtually any ISP’s system provided you
have correctly configured the Router’s settings for your ISP’s connection type. Your ISP
connection settings are provided to you by your ISP. To configure the Router with the settings
that your ISP gave you, click “Connection Type” (A) on the left side of the screen. Select the
connection type you use. If your ISP gave you DNS settings, clicking “DNS” (B) allows you to
enter DNS address entries for ISPs that require specific settings. Clicking “MAC Address” (C) will
let you clone your computer’s MAC address or type in a specific WAN MAC address, if required
by your ISP. When you have finished making settings, the “Internet Status” indicator will read
“connection OK” if your Router is set up properly.
[wan.tif]
(A)
(B)
(C)