User's Manual

C Alarms
236 Installation and Configuration Guide: Airgo Access Point
sweep.
Usage: Informational log.
Examples: DeviceId AP_00-0A-F5-00-02-1F Node [Ip=192.168.74.210, persona=6]
deleted from database.
See Also: <Discovered new node>
Discovery: Managed nodes limit exceeded
Generated when a the number of nodes discovered exceeds the predefined limit on the NM portal.
Syntax: On Device %s Node[Ip=%s] managed node limit exceeded. Current
managed nodes limit is %d.
Description: This alarm is generated when the number of discovered nodes exceeds the
predefined limit. The current limit on number of access points discovered is 50.
This limit can be configured to be lower.
Usage: If this alarm occurs then the discovery server will not discover nor track any new
nodes once this limit is reached. In such case, delete unwanted nodes and
manually add the nodes to the discovery database so that they may be managed.
Examples: On Device AP_00-0A-F5-00-02-1F Node[Ip=192.168.74.245] managed node
limit exceeded. Current managed nodes limit is 10.
See Also:
Enrollment: Node Enrolled
Alarm generated when an Airgo AP is enrolled into the nework
Syntax: NMPortal with DeviceId %s has successfully enrolled a remote node having ApDeviceId=%s
NodeIp=%s and Persona=%d
Alarm Parameters
Device The Device ID of the NM Portal
IP The IP address of the node being deleted.
Node Limit The current limit imposed on the discovery server.
Alarm Severity
Severity Critical
Alarm Parameters
DeviceId The Device ID of the NMPortal
ApDeviceId The Device ID of the remote AP