User's Manual

Common Problems and Solutions
Installation and Configuration Guide: Airgo Access Point 225
Poor or lower than
expected signal strength,
as measured by wireless
network adapters
attempting to connect to
the Access Point.
Access Point may be poorly
placed, or external antenna not
connected properly.
The Access Point and/or its external
antenna should not be in an obstructed
location. Metallic objects (such as
equipment racks) and some construction
materials can block wireless signals. If
this is the case, reposition the Access
Point(s) and/or any external antennae to
be free of these obstructions.
If using an external antenna, also make
sure that it is connected securely to the
Access Point.
Table 15: Common Problems and Solutions
Symptom Problem Solution