User's Manual

Configuring Administrator Security
Installation and Configuration Guide: Airgo Access Point 145
Figure 107: Administrator Security - Admin Password
Set the following values on this panel:
Click Apply to save the settings or Reset to clear the fields on the panel.
External RADIUS Server Settings
The following rules apply for an external RADIUS server:
• The external RADIUS server must have Password Authentication Procedure (PAP)
authentication enabled for administrative users.
• The Airgo AP sends a standard RADIUS attribute called “Service-Type” in the authentication
request. The value of this attribute is set to “Administrative” to indicate that the user to be
authenticated has requested access to an administrative interface on the AP
• If the user authentication is successful, the RADIUS server must send back an Airgo vendor-
specific attribute defined as follows:
vendor-id=13586, vendor sub-type=3, integer value = 1.
Field Description
Change Local Admin
Password
Enter the old password and the new password, and confirm the new password.
This password is used for the local administrative login and the SNMPv3
administrative login. (required)
RADIUS Authentication
for Network
Administrator Login
Select whether to use the Portal AP security feature for network administrator
authentication or use an external RADIUS server. With the external RADIUS
server option, links are available to add, delete, or edit the list of servers.
(required)