User's Manual

Managing the AP Configuration
Installation and Configuration Guide: Airgo Access Point 215
Figure 163: Configuration Management - Secure Backup
Configuration Reports
Select any of the following configuration reports on this tab (Figure 164):
Restore the AP
configuration
1 In the Restore Configuration area, click Browse and select the
configuration file.
2 Click Apply to restore the configuration and reboot the AP.
NOTE: If the AP has been unenrolled or restored to factory defaults, it is not
possible to reapply the configuration using this method. The AP must be
reenrolled and have a new configuration created.
Generate support logs 1 Click Generate Support Logs.
2 When the configuration is generated, a hyperlink is displayed. Right-click
and select Save As to save the configuration locally.
3 After the support logs file is saved, click Delete to remove the file from the
AP. The file takes up space on the AP disk, so it is recommended to
remove it.
Report Description
Startup-Config Provides details on the configuration that is stored on the AP flash device and
used each time the AP reboots.
Running-Config Provides details on the current AP configuration, which may or may not
match the startup configuration.
Default-Config Lists the factory default settings shipped on the AP.
Task Steps