User's Manual

10 Maintaining the Access Point
212 Installation and Configuration Guide: Airgo Access Point
The tab contains the following settings:
License Management
Use the License Management tab (Figure 160) if it is necessary to change the license key for the
AP. Enter or verify the license key for the AP, and click Apply. Click Reset to restore the previous
license key.
Figure 160: System Configuration - License Management
NMS Configuration
Use the NMS Configuration tab (Figure 161) to identify network management servers and to
determine which network management system will receive fault and event notifications.
Field Description
Syslog-Level Select the activity level that triggers a syslog entry. Choose from several
levels (Emergency, Alert, Critical, Error, Warning, Notice, Info, or Debug).
(required)
Syslog-Level Module Select whether to record a specific type of activity, or include all the activities
in the list. (required)
Remote Syslog Logging Indicate whether to enable a remote server to monitor events across the
network.
Remote Syslog Server If the Syslog server is enabled, enter the remote server hostname or IP
address.
Remote Syslog Server
Port
If the Syslog server is enabled, enter the IP address or hostname of the server
port. (optional)
NOTE: If the AP is already enrolled, it is not necessary to modify the settings on this
panel.