User's Manual

10 Maintaining the Access Point
210 Installation and Configuration Guide: Airgo Access Point
IP Configuration
Use the IP Configuration tab (Figure 158) to update the IP and basic system configuration for the
Airgo AP.
Figure 158: System Configuration - IP Configuration
The tab is divided into two sections. Click Apply after configuring each section, or Reset to return
to the default values. Configure the following fields:
Field Description
DHCP Assigned IP
address
Enables the AP to obtain an IP address for the AP from the network
DHCP server.
DNS IP Address Enter the IP address of the DNS server. (required)
Management IP address
/Maskbits
Enter the IP address and subnet prefix of the management server.
(required)
Gateway IP address Enter the IP address of the network gateway. (required)
Host Name
Enter a unique name for the AP. The default is the device ID,
which is derived from the MAC address. (required)
AP Location Enter a text description of the physical location of the AP.
Administrator Contact Enter the email address of the administrative contact for the AP.