User's Manual

Installation and Configuration Guide: Airgo Access Point 209
10
Maintaining the Access Point
This chapter describes the tools available to maintain the Airgo Access Point. It contains the
following sections:
• Rebooting the AP
• Managing the System Configuration
• Click Apply to save the entries or Reset to return to the previously saved values.
• Upgrading Software
• Common Problems and Solutions
Rebooting the AP
Choose Reboot AP from the System Services menu to order a reboot of the access point. To begin
the process, click Reboot (Figure 158). The process takes approximately 2 minutes, and may take
additional time if the AP is currently used for wireless backhaul service.
Figure 157: System Configuration - Reboot AP
Managing the System Configuration
Choose System Configuration from the System Services menu to access the network-related
configuration features of the Airgo AP and set up syslog parameters.
The panel includes the following tabs:
• IP Configuration—Configure IP and host settings.
• Syslog Configuration—Set up and view the syslog.
• License Management—Set up the real time clock (RTC) to keep track of time in the event that
power is lost to the AP.
• NMS Configuration—Specify the entities used for network management, including the NMS
Pro server and NM Portal AP.
• Hardware Options—Enable the real time clock and buzzer.